Description
ChemCon Hi-Flow Adhesive is a very low viscosity instant adhesive designed for bonding most types of substrates. ChemCon adhesives are designed for bonding most types of substrates instantly. They are ideal for bonding fabric (mesh) to wood or aluminum frames. The low to medium viscosities allow full penetration between bond lines and promote rapid curing. ChemCon adhesives are a 1 part system: they do not require the addition of a catalyst. ChemCon adhesive’s bond is initiated on contact, which dramatically increases output in the screen re-stretch department. The use of an instant adhesive hardener will instantly cure and bond surfaces together. Surfaces to be bonded must be clean and dry.
Apply an even layer of instant adhesive, using the applicator tip provided, to the surfaces to be bonded. Though cure is initiated on contact, most bonds will achieve full cure in 24 hours. An application of CCI's Hardener will instantly cure and bond surfaces together.
Kit Includes:
- 1 lb. Hi-Flow Adhesive
- 11 oz. (Can) Adhesive Hardener
- 1 Plastic Spreader
- 2 Extra Adhesive Caps
FOLLOW WARNINGS AND DIRECTIONS CAREFULLY
- ChemCon Hi-Flow ~ Very Low Viscosity
- ChemCon 100 ~ Low Viscosity
- ChemCon 300 ~ Medium Viscosity
Advantages:
- Easy To Use
- Economical
- Instant Bond
- Ideal For Use With Wood Or Aluminum Frames
- No Mixing Required
- Long Shelf Life
- Non-Hazardous
ChemCon Adhesive Hardener - Aerosol Can is formulated to cure and bond cyanoacrylate adhesives instantly. It is ideal for bonding fabric (mesh) to wood or aluminum frames. The use of ChemCon Adhesive Hardener dramatically speeds up the re-stretch process, allowing the frame to be "cut-out" immediately.
11 oz. Net Per Can
Advantages:
- Easy To Use
- Economical
- Instantly Cures Cyanoacrylate Adhesive
- Speeds Up Re-Stretch Process
- No Mixing Required
- Long Shelf Life
Adhesive:
Click here to view Safety Data Sheet
Click here to view Technical Data Sheet
Hardener:
Click here to view Safety Data Sheet
Click here to view Technical Data Sheet
